Project examples: what typical garage and business floor coatings look like and what they cost
Epoxy Floors Shore Carlsbad shows worked examples of typical Carlsbad area projects — the floor and how it is used, the hardware involved and the market price range such a job carries. Every picture is an AI concept illustration; no installation was performed or arranged through this site.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Worked example pages. The pictures are AI concept illustrations, not photographs; no installation was performed or arranged through this site; prices are typical Carlsbad area market ranges, not quotes.
Illustration
Worked case: a one-car garage floor in solid-color epoxy near the Village
Worked example for a small detached garage near Carlsbad Village: 240 square feet of solid-color epoxy with grit over an older slab with hairline cracks, the grind, the moisture check and typical price ranges.
Typical total: $960–$1,920 (market range, not a quote) · Related service: Solid-Color Epoxy Garage Floors
Illustration
Worked case: a two-car flake epoxy garage in Rancho Carrillo, old peeling coating removed first
Worked example for a two-car garage in Rancho Carrillo: 440 square feet of full-broadcast flake epoxy after a peeling older coating is ground off, with a stem wall coated; method, tools and typical price ranges.
Typical total: $2,790–$5,240 (market range, not a quote) · Related service: Garage Floor Coating Removal and Recoat
Illustration
Worked case: a three-car polyaspartic flake garage in Aviara
Worked example for a three-car garage in Aviara: 700 square feet of polyaspartic flake over a sound slab, a custom flake blend, contents moved out and back, cure stages and typical price ranges.
Typical total: $4,450–$7,700 (market range, not a quote) · Related service: Polyaspartic Garage Floors
Illustration
Worked case: a 3,000-square-foot warehouse aisle in a business park near the research center, striped and joint-filled
Worked example for a flex-space warehouse in the Carlsbad Research Center area: 3,000 square feet of solid-color epoxy with grit, saw joints filled, aisle striping and a phased schedule; method, tools and typical price ranges.
Typical total: $12,700–$32,100 (market range, not a quote) · Related service: Warehouse Floor Coating
Illustration
Worked case: a 1,200-square-foot restaurant kitchen floor in urethane cement with a coved base, Village area
Worked example for a restaurant kitchen near Carlsbad Village: 1,200 square feet of urethane cement with a coved base, repair of cracked tile joints, the county plan check and a phased schedule; typical price ranges.
Typical total: $14,700–$27,700 (market range, not a quote) · Related service: Commercial Kitchen Flooring
Illustration
Worked case: a four-bay auto shop floor coated in solid-color epoxy with grit near Bressi Ranch
Worked example for a four-bay auto shop in the Bressi Ranch business area: 2,400 square feet of solid-color epoxy with grit over an oil-soaked slab, joints filled and the work taken one bay at a time; method, tools and typical price ranges.
Typical total: $12,400–$30,000 (market range, not a quote) · Related service: Auto Shop Floor Coating
About these examples
Each example is a hypothetical, typical project for a kind of garage or business floor that is common in the Carlsbad area. Every picture is a concept illustration, AI-generated — not a photo of a completed installation — showing the kind of floor the scenario describes. The prices are the same market ranges used by the availability check, shown as ranges because an installer prices the actual job after seeing the floor.
What the ranges include
Each table starts from the per-square-foot range for the coating system, adds the slab-condition surcharge, multiplies by the floor area and then adds the flat options that define the scenario — a stem wall, a cove base, joint filling. Add-ons listed under an example are priced the same way. Nothing in these pages is an offer; the ranges describe what such work typically costs locally.
How to use them
Find the example closest to your floor, note the materials and prep it calls for and the typical range, then run the availability check below with your own floor area, the coating system and the slab condition — the range it shows is built from the same table.
Check availability and get your price range
Bookings aren't open yet — a typical Carlsbad range in about 30 seconds.